INSTALLATION^
[Base
unit mounting instructions
I
The
CPU
and extension base units should be mounted in accordance with the
following instructions;
1.
To
improve the ventilation of the
PLC
and to facilitate the addition or
removal of any modules, allow a minimum
30
mm
11.18
in. clearance
around the base unit.
Indicates the panel top, wiring
duct,
or any assembly
or
more
//////////////////////
Parallel
Mounting
30 mrn
(1
.I7
in.)
D
-
30 mrn
(1.17
in.)
-
Or
Inore
Serial Mounting
45
To Next Page
Loading...