F940GOT-SWD-E/LWD-E System configuration 1.
1-4
Note:
This two-port interface function is effective in CPU port connection (via the RS-422). This
function is not available in computer link connection (via the RS-422 or the RS-232C) and CPU
port connection (via the RS-232C).
And even in CPU port connection (via the RS-422), this function is not available when two or
more GOT units are connected.
General-purpose
personal computer
Peripheral unit to create
sequence programs
1
* A general-purpose computer can be directly connected, and
both the GOT and the personal computer can be used at
the same time (without using the FX-2PIF).
When the two-port interface function is used using the software
package SW D5C(F)-GPPW-E, make sure to use the
connection cable having the model name shown on the left to
connect a personal computer.
To Next Page
Loading...
