Mitsubishi Mirage 2017 User Manual

Cruise control (if so equipped)
Features and controls 5-53
5
Used to increase the set speed and to return to
the original set speed.
Used to deactivate the set speed driving.
N00518400385
1. With the ignition switch is in “ON” posi-
tion or the operation mode is in ON, press
the CRUISE CONTROL ON/OFF switch
(A) to turn on the cruise control. The indi-
cator in the meter cluster will come on.
2. Accelerate or decelerate to your desired
speed, then press and release the SET -
switch (B) when the indicator is illumi-
nated. The vehicle will then maintain the
desired speed.
N00518500344
There are 2 ways to increase the set speed.
Press and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
C- RES + switch
D- CANCEL switch
NOTE
 When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
Indicator
NOTE
 When you release the SET - switch, the vehi-
cle speed will be set.
To increase the set speed
RES + switch
BK0235100US.book 53 ページ ２０１５年１１月２０日 金曜日 午後３時１２分

Mitsubishi Mirage 2017 Specifications

General

Brand	Mitsubishi
Model	Mirage 2017
Category	Automobile
Language	English