Mitsubishi Mirage 2017 User Manual

Seat belts
4-12 Seat and restraint systems
4
seat belt. It goes off when the seat belt is sub-
sequently fastened.
N00406300357
The seat belt anchor height can be adjusted.
To move the anchor, pull the lock knob (A)
and slide the anchor to the desired position.
Release the lock knob to lock the anchor into
position.
N00406700205
If your seat belt is not long enough, even
when fully extended, a seat belt extender
must be obtained. The extender may be used
for either of the front seats.
WARNING
 When a child booster seat is used on the
front passenger seat, the front passenger
seat belt warning light will not come on, if
the seat belt is not fastened when the
booster seat is used. Confirm that the
child is wearing the seat belt properly.
 Do not install any accessory or sticker that
makes the light difficult to see.
Adjustable seat belt shoulder
anchor (front seats)
WARNING
 Always adjust the shoulder belt anchor so
that the shoulder belt is positioned across
the center of your shoulder without touch-
ing your neck. The shoulder belt should
not be able to fall off your shoulder. Fail-
ure to follow this instruction can adversely
affect seat belt performance and increase
the risk of serious injury or death in the
event of an accident.
 Adjust the shoulder belt anchor only when
the vehicle is not in motion.
 Make sure the anchor is securely locked in
position after adjusting it.
Seat belt extender
WARNING
 The extender should only be used if the
existing belt is not long enough. Anyone
who can use the standard seat belt should
not use an extender. Unnecessary use of an
extender can adversely affect seat belt
performance in an accident.
 When not required, the extender must be
removed and stowed.
BK0235100US.book 12 ページ ２０１５年１１月２０日 金曜日 午後３時１２分

Mitsubishi Mirage 2017 Specifications

General

Brand	Mitsubishi
Model	Mirage 2017
Category	Automobile
Language	English