Mitsubishi Mirage 2017 User Manual

Wiper and washer switch
5-78 Features and controls
5
and the blades are freed, otherwise the wiper
motor may be damaged.
With the lever in the “INT” (speed sensitive
intermittent operation) position, the intermit-
tent intervals can be adjusted by turning the
knob (A).
The misting function can be used when the
ignition switch or the operation mode is in
ON or ACC.
The wipers will operate once if the wiper
lever is raised to the “MIST” position and
released. This operation is useful when it is
drizzling, etc. The wipers will continue to
operate while the lever is held in the “MIST”
position.
N00504600298
To turn on the windshield washer, pull the
lever toward you with the ignition switch or
the operation mode is in ON or ACC.
The wipers will wipe automatically several
times when the washer fluid is sprayed.
To turn off the spray, release the lever.
MIST- Misting function
The wipers will operate once.
OFF- Off
INT- Intermittent (Speed sensitive)
LO- Slow
HI- Fast
To adjust intermittent intervals
1- Fast
2- Slow
NOTE
 The speed-sensitive-operation function of
the windshield wipers can be deactivated.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
Misting function
Windshield washer
BK0235100US.book 78 ページ ２０１５年１１月２０日 金曜日 午後３時１２分

Mitsubishi Mirage 2017 Specifications

General

Brand	Mitsubishi
Model	Mirage 2017
Category	Automobile
Language	English