USB input terminal (if so equipped)
5-104 Features and controls
3. Connect the connector cable to the iPod.
4. Connect the connector cable (D) to the
connector cable (B).
Be sure to hold the terminal part (A) of
the connector cable as shown in the illus-
tration.
5. Fix the connector cable (A, B) on the
clips.
1. Turn the ignition switch to the “OFF”
position or put the operation mode in
OFF.
2. Remove the connector cable (D).
Be sure to hold the terminal part (A) of
the connector cable as shown in the illus-
tration.
3. Fix the connector cable on the clips and
close the glove compartment.
N00567000015
N00567101143
Devices of the following types can be con-
nected.
Use a genuine connector cable from Apple
Inc.
An open glove compartment door can
cause a serious injury or death to the front
passenger in an accident, even if the pas-
senger is wearing his/her seat belt. Always
keep the glove compartment door closed
when driving.
When closing the glove compartment, be
careful not to trap the connector cable and
iPod.
To remove
Types of connectable devices
and supported file specifica-
tions
Device types
BK0235100US.book 104 ページ ２０１５年１１月２０日 金曜日 午後３時１２分
To Next Page
Loading...
Need help?
General
