Mitsubishi Mirage 2017 User Manual

Automatic air conditioning (if so equipped)
Comfort controls 7-15
7
When the air conditioning turns on, the air
selection is controlled automatically. When
the air conditioning turns off, the air selection
automatically goes back to the outside air
position.
If high cooling performance is desired, or if
the outside air is dusty or contaminated in
some way, use the recirculation position.
Switch to the outside air position every now
and then to keep the windows from fogging
up.
N00760000089
You can change the following functions to
match your preference.
 Enable automatic air control:
When the AUTO switch is pressed, the air
selection switch will also be automatically
controlled.
 Disable automatic air control:
Even when the AUTO switch is pressed,
the air selection switch will not be auto-
matically controlled.
 Changing the settings
Press the air selection switch for about 10
seconds or longer.
When the setting has changed, the system
will beep and the “ ” indicator will
flash.
• When the setting has changed from
enabled to disabled,
the system will beep three times and the
indicator will flash three times.
• When the setting has changed from dis-
abled to enabled,
the system will beep two times and the
indicator will flash three times.
CAUTION
 Using recirculated air for a long time may
cause the windows to fog up.
NOTE
 If you press the AUTO switch to select auto-
matic control after manual operation, the air
selection switch will also be automatically
controlled.
Personalizing the air selection
(Changing the function setting)
NOTE
 The factory setting is “Enable automatic air
control”.
 When the defogger switch is pressed, the air
selection will automatically change to the
outside air position, even if the system is set
to “Disable automatic air control”, in order
to prevent windows from fogging up.
BK0235100US.book 15 ページ ２０１５年１１月２０日 金曜日 午後３時１２分

Mitsubishi Mirage 2017 Specifications

General

Brand	Mitsubishi
Model	Mirage 2017
Category	Automobile
Language	English