2. Turn the SEL switch or press the
/MENU button several times to select
“PHONE SET” and then press the SEL
switch.
3. Turn the SEL switch to select “
PHONE IN ” and then press the SEL
switch.
4. Turn the SEL switch to select “IN-L”
(output sound from the left side speaker)
or “IN-R” (output sound from the right
side speaker) and then press the SEL
switch.
N00703001021
You can listen to commercially available
audio equipment, such as a portable audio
system, from your vehicle’s speakers, by con-
necting the audio equipment to the auxiliary
audio connector.
1. Connect the headphone port of the porta-
ble audio system to the auxiliary audio
connector using a commercially available
connection cord.
2. Press the MEDIA button several times to
switch to the AUX mode. The display will
show “AUX” and then the external audio
input mode will be activated.
3. To deactivate the external audio input
mode, press the MEDIA button to switch
to another mode.
When operation of turn of the SEL switch is
enabled, the SEL indicator will appear on the
display.
When the following operation is performed,
this mode will be canceled.
• The button is pressed.
• The any operation is not performed for
more than 10 seconds.
• The EXIT “MENU” is selected.
To use the external audio input
function
A- Auxiliary Audio connector (Mini-jack)
B- MEDIA button
C- Display
The connected audio equipment cannot be
adjusted using the vehicle’s audio system.
Depending on the connected audio equip-
ment, it may produce noise from the speak-
ers.
BK0235100US.book 28 ページ 2015年11月20日 金曜日 午後3時12分