N00762401097
1. Press the PWR switch to turn on the audio
system. The system turns on in the last
mode used.
2. Connect your iPod to the USB input ter-
minal.
Refer to “How to connect an iPod” on
page 5-103.
3. Press the MEDIA button several times to
switch to the iPod mode. The input mode
changes as follows every time the
MEDIA button is pressed: CD mode
iPod mode Bluetooth
®
mode (if so
equipped) AUX mode CD mode.
The iPod indicator are illuminated and
then the iPod mode will be activated.
4. Once the device is selected, playback
starts and indicator appears on the dis-
play.
5. To stop the playback, press the RADIO
button or MEDIA button to switch to a
different mode.
N00762500033
To fast-forward/reverse the current track,
press the button or button.
To fast-forward the current track, press the
button. While the button is kept pressed,
the track will be fast-forwarded.
To fast-reverse the current track, press the
button. While the button is kept pressed, the
track will be fast-reversed.
N00762600034
Press the button repeatedly until the
desired track number appears on the display.
Press the button repeatedly until the
desired track number appears on the display.
N00762701087
You can select desired tracks from the “Playl-
ists”, “Artists”, “Albums”, “Songs” or
12-
(Fast-reverse/Track down) button
13-
(Fast-forward/Track up) button
14-
(Return) button
15- PWR (On-Off)/SEL (Select) switch
16- RPT (Repeat) button
17- RDM (Random) button
To play from an iPod
Buttons on the iPod are disabled while the
iPod is connected to the audio system.
To adjust the volume and tone, refer to “To
adjust the volume” on page 7-20 and “To
adjust the tone” on page 7-20.
To fast-forward/reverse the track
Fast-forward
Fast-reverse
To select a desired track
Track up
Track down
To Next Page
Loading...
Need help?
General
