Keyless entry system (if so equipped)
5-8 Features and controls
Operation is subject to the following two con-
ditions.
This device may not cause harmful inter-
ference.
This device must accept any interference
received, including interference that may
cause undesired operation of this device.
N00544101188
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. Remote the screw (A) from the remote
control transmitter.
3. With the Mitsubishi mark facing you,
insert the cloth-cov-ered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
4. Remove the old battery.
5. Install a new battery with the + side (B)
up.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
Be sure to perform the procedure with the
Mitsubishi mark facing you. If the
Mitsubishi mark is not facing you when you
open the remote control transmitter case, the
buttons may come out.
The Federal Communications Commission
(FCC) ID number, the Industry Canada (IC)
number and the model number (radio certifi-
cation) are indicated in the illustrated posi-
tion.
BK0235100US.book 8 ページ ２０１５年１１月２０日 金曜日 午後３時１２分
To Next Page
Loading...
Need help?
General
