AIR FLOW velocity and direction can be selected
as required.
II
To change the AIR FLOW velocity, press
the _-_ button.
Each time the button is pressed, the fan speed is
changed in sequence: • (Lo) -_ ,,m (Med) -_ •ill (Hi)
-_ _ (AUTO)
• Use the tall (HI) notch to cool the room more.
• If the opersting sound of the air conditioner disturbs your
sleep, use the • (Lo) notch.
II
To change the AIR FLOW blowing direc-
tion vertically, press the _ button.
Each time the button is pressed, the angle of the hori-
zontal vane is changed in sequence: - (1) --_ • (2) --_
• (3) _ s (4) _ j (5) _ _ (SWING) _ _ (AUTO)
SWING OPERATION
Use the swing operation for the air flow to reach all corners
of the room.
Recommended horizontal vane
range
Use the _ (AUTO) position usu-
ally.
Use position - (1) or ,, (2) in the
COOL or DRY mode when adjust-
ing to your requirements.
NOTE
In the cooling operation, when the air conditioner is op-
erated with setting the horizontal vane to, (4) or i (5) for
1 hour, the AIR FLOW direction is automatically set to
horizontal to prevent condensed water from dropping.
Adjust the vertical AIR FLOW direction using the remote
controller. If the horizontal vane is moved manually, it
may cause trouble.
!f
To Next Page
Loading...
