Mitsubishi MXZ-8C60NA-U1 - Outlines and Dimensions

36
5 OUTLINES AND DIMENSIONS
5-1. OUTDOOR UNIT
MXZ-4C36NAHZ MXZ-5C42NAHZ MXZ-8C48NAHZ MXZ-8C48NA
Air Discharge
Rear Air Intake
Side Air Intake
2-12×36 Oval holes
(Foundation Bolt M10<W3/8>)
2-U Shaped notched holes
(Foundation Bolt M10<W3/8>)
Installation Feet
42 <1-21/32>
56 <2-7/32>
370 <14-9/16>
25 <1>
417 <16-13/32>
70
<2-3/4>
28 <1-3/32>
225
<8-27/32>
225
<8-27/32>
330 <13>
600
<23-5/8>
19 <3/4>
56 <2-7/32> 33.2 <1-5/16>
0
53 <2-3/32>
1/2 inch Conduit
attachment
{
22.2<7/8>
{
34.5<1-23/64>
When installing the conduit.
Set the attachment to the inner side of each panel.
1 inch Conduit
attachment
Scale 1:5
24.7 <31/32>
5<3/16>
60 <2-3/8> 24 <15/16>
101.5 <4>
Ground for the
branch box power supply
For the power supply
For the branch box power supply
For the
transmission line
For concentration
control
Terminal connection
From left to right
Handle for moving
Ground for the transmission line Ground for concentration control
1
2
Handle for moving
Service panel
Ground for the power supply
("GR"marking position)
632 <24-7/8>
1338 <52-11/16>
26 <1-1/32>
1050 <41-11/32>
1067 <42>
426 <16-25/32> *
1
369 <14-17/32>
362 <14-1/4>
510 <20-3/32> *
1
Rear piping cover
Front piping cover
Air intake
Bottom piping hole (Knockout)
Drain hole
(5-
{
33<1-5/16>)
160
<6-5/16>
110 <4-11/32>
160
<6-5/16>
160
<6-5/16>
136
<5-11/32>
86 <3-3/8>
81 <3-3/16>
45 <1-25/32>
154
<6-1/16>
Right piping hole (Knockout)
Conduit hole
(
{
24<15/16>Knockout)
Conduit hole
(
{
37<1-15/32>Knockout)
Right trunking hole (Knockout)
92 <3-5/8>
60 <2-3/8>
5<3/16>
60 <2-3/8>
55 <2-3/16>
53 <2-3/32>
92
<3-5/8>
26 <1-1/32> 27 <1-1/16>
29 <1-5/32>
73 <2-7/8>
{
92
<3-5/8>
Min. 150mm<5-29/32>Min. 1000mm<39-3/8>
Side Air Intake
Conduit hole
(
{
37<1-15/32>Knockout)
Front trunking hole (Knockout)
Front piping hole (Knockout)
Conduit hole
(
{
24<15/16>Knockout)
55 <2-3/16>
27 <1-1/16>
92 <3-5/8>
75 <2-15/16>
73 <2-7/8>26 <1-1/32>
55 <2-3/16>
60
<2-3/8>
5
<3/16>
60 <2-3/8>
{
92
<3-5/8>
FREE
Min. 15mm<19/32>
Min. 15mm<19/32>
Handle for moving
Handle for moving
Rear Air Intake
Conduit hole
(
{
24<15/16>Knockout)
Conduit hole
(
{
37<1-15/32>Knockout)
Rear trunking hole (Knockout)
Rear piping hole (Knockout)
75 <2-15/16>
60 <2-3/8>
92 <3-5/8>
73 <2-7/8>
26 <1-1/32>
27 <1-1/16>
55 <2-3/16>
55 <2-3/16>
5<3/16>
60 <2-3/8>
{
92
<3-5/8>
1……Refrigerant GAS pipe connection (FLARE){15.88 (5/8F) 2……Refrigerant LIQUID pipe connection (FLARE){9.52 (3/8F) *
1
.......Indication of STOP VALVE connection location.
Piping and wiring connections
can be made from 4 directions:
FRONT, Right, Rear and Below.
4 PIPING-WIRING DIRECTIONS
3 FOUNDATION BOLTS
2 SERVICE SPACE
1 FREE SPACE (Around the unit)
Please secure the unit firmly
with 4 foundation (M10<W3/8>) bolts.
(Bolts and washers must be purchased locally.)
Dimensions of space needed
for service access are
shown in the below diagram.
The diagram below shows a basic example.
Explantion of particular details are
given in the installation manuals etc.
Max.
<Foundation bolt height>
FOUNDATION
Service space
Min.
Min.
Min.
Min.
15 <19/32>
500
<19-11/16>
500
<19-11/16>
150
<5-29/32>
30 <1-3/16>
Piping Knockout Hole Details
Example of Notes
mm<inch>
Unit: mm <inch>
OCH573C