11
OPERATIONS
KEYLESS ENTRY SYSTEM
FAST-KEY (IF EQUIPPED)
While carrying the FAST-key, press the driver’s door lock/unlock
switch
.
IF THE FAST-KEY IS NOT OPERATING PROPERLY
Remove the key from the FAST-key remote and unlock the door
manually. Then, insert the FAST-key into the key slot in the floor
console. Starting the engine and changing the operation mode
should be now possible. Remove the FAST-key from the key slot
after starting the engine or changing the operation mode.
FAST-KEY
NORMAL KEY
OPERATION INDICATOR LIGHT
LOCK (
) BUTTON
UNLOCK (
) BUTTON
POWER LIFTGATE BUTTON
(IF EQUIPPED)
PANIC BUTTON
START/STOP ENGINE SWITCH (IF EQUIPPED WITH FAST-KEY)
While carrying the FAST-key within the operating range, the Start/Stop
button can be used to start the engine.
• Move the selector lever in “P” position and hold the brake pedal
Down. Push the Start/Stop button.
• To stop the engine, stop the vehicle completely and move the selector
lever to “P” then press the Start/Stop button.
*If you have to bring the engine to an emergency stop while driving, press and hold the
Start/Stop button for 3 seconds or more, or press it quickly 3 times or more.
• If you press the Start/Stop button without depressing the brake pedal, you can change
the operation mode in the order of OFF, ACC, ON, OFF.
*If the engine cannot be started with depressing the brake pedal, depress the brake
pedal more firmly than usual with the right foot. Then, press the power switch.
• If the engine cannot be started or the operation mode cannot be changed, check the
position of the FAST-key or the battery performance of the FAST-key.
To Next Page
Loading...
Need help?
General
