6
The drive mode can be switched by pressing the drive mode button
while the ignition switch is in the ON position.
PRESSING THE BUTTON WILL CHANGE THE DRIVE MODE IN ORDER TO:
4WD: 4WD ECO, 4WD AUTO, 4WD LOCK
S-AWC: AWC ECO, NORMAL, SNOW, LOCK
OWN THE ROAD
A
- CANCEL: To deactivate the ACC or cruise control.
B
- RES + : To increase the set speed or resume control
after cancelling the ACC or cruise control function.
C
- SET – : To set the desired speed and to reduce the
set speed.
D
- ON/OFF: To turn cruise control ON or OFF.
E
- ACC DISTANCE SWITCH: Used to set or change the
following distance between your vehicle and the
vehicle in front of you.
CRUISE CONTROL / ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
TO SET A CRUISING SPEED
1. Press
D
and the “ACC” (if equipped) or “CRUISE” indicators will appear in
the Multi-information Display.
2. Accelerate or decelerate to your desired speed (above 25 mph). Press
C
and
remove your foot from the accelerator pedal.
TO ACCELERATE OR DECELERATE SPEED
Push up
B
to increase set cruising speed.
Push down
C
to decrease set cruising speed.
TO CANCEL THE CRUISING SPEED
Press
A
or press the brake pedal, or press
D
.
PADDLE SHIFTERS (GT ONLY) DRIVE MODE SELECTOR (IF EQUIPPED)
Simply upshift or downshift with a tap of your
fingers – without moving your hands from the
steering wheel.
You can return to the “D” operation by pulling
the + (SHIFT UP) side paddle shifter rearwards
(toward the driver) and holding for over
2 seconds.
A
B
C
D
E
To Next Page
Loading...
Need help?
General
