14
AUDIO SYSTEM
AUDIO REMOTE CONTROL SWITCH
VOLUME UP
SEEK
Change station or track
VOLUME DOWN
MODE
Change the audio source
USB AND IPOD
®
INPUT
1. Park your vehicle in a safe place and turn the ignition switch to the “OFF” position or put the
Operation Mode in OFF.
2. Plug in the USB connecting cable that is supplied with your device and connect the USB end into the
input terminal located in the floor console box.
3. Turn the ignition switch or the Operation Mode to the “ACC” position. Turn on the audio system.
4. Press MEDIA to switch to the USB mode.
5. Depending on your USB device, it may take longer for playback to start.
6. Once the device is selected, playback starts.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
SE, SEL, LE and GT Model shown
To Next Page
Loading...
