26
If necessary, measure the voltage with another Main drive lithium-ion battery front cable (P, N line),
Main drive lithium-ion battery rear cable (P, N line) and EV charger cable (Quick charging P, N line)
<Vehicles with quick charging system>.
If there is still potential, disconnect the high voltage wiring from the drive battery to the service plug and
drive battery.
Remove the "Service plug". (Refer to 3-7)
Insulates the separated high-voltage wiring terminals to prevent electric shock.
4) Vehicle processing procedure after fire extinguishing
Be sure to wear insulating protective equipment and dispose of it.
When lifting a vehicle with a crane or lift, lift the vehicle body, not the wheels.
Use an insulating sheet between the crane or lift and the car body to lift it.
When mounting the vehicle on the loading surface of a truck, lay an insulating sheet and place it on the
insulating sheet.
When transporting only the drive battery, lay an insulating sheet on the loading surface, place it on the
insulating sheet, and cover it with a non-energized cover.
Attach the high voltage identification label to the vehicle and drive battery.
To Next Page
Loading...
