Mitsubishi PUY-A36NHA6 - 10-2-1. Test run for wired remote controller <PAR-30 MAA> <PAR-31 MAA>

27
F1 F2 F3 F4
unem ecivreS
rosruC
:unem niaM
Test run
Input maintenance info.
Function setting
Check
Self check
F1 F2 F3 F4
Test run menu
Cursor
Service menu:
Test run
Drain pump test run
1
Select"Service"fromtheMainmenu,andpressthe button.
2
Select"Testrun"withthe F1 or F2 button,andpressthe button.
Select"Testrun"withthe F1
or F2 button,andpressthe button.
F1 F2 F3 F4
Cool
Pipe
Auto
Switch disp.
Mode Fan
RemainTest run
F1 F2 F3 F4
Remain
Vane
Coolmode:Checkthecoldairblowsout.
Heatmode:Checktheheatblowsout.
Pressthe F1
buttontogothroughtheoperationmodesintheorderof"Cool
andHeat".
Checktheautovanewiththe F1
F2 buttons.
Pressthe
buttontoreturnto“Testrunoperation”.
Pressthe
button.
Whenthetestruniscompleted,the“Testrunmenu”screenwillappear.
Thetestrunwillautomaticallystopafter2hours.
Test run operation
Auto vane check
Pressthe buttonandopentheVanesettingscreen.
Functionbuttons
F1 F2 F3 F4
MENU RETURN SELECT ON/OFF
10-2-1. Test run for wired remote controller <PAR-30MAA> <PAR-31MAA>
Checktheoperationoftheoutdoorunitfan.
OCH577A