To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi PU36EK and is the answer not in the manual?
General| Cooling Capacity | 3.6 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Rating | A++ |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (H x W x D) | 550 x 800 x 285 mm |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | 3.5 |
| Noise Level (Outdoor Unit) | 50 dB(A) |
| Type | Split Type |
Highlights the industry's first redi-charged refrigerant system for reduced installation time.
Details features like self-diagnostic function, time delay, and auto-restart for reliability.
Describes the flexible piping connection from four directions for easier installation.
Presents the wiring diagram and component list for PU12EK and PU18EK1 models.
Details wiring diagram and component list for the PU18EK model.
Presents wiring diagrams and component lists for PU24EK, PU30EK, PU36EK, PU42EK2.
Wiring diagrams and component lists for various PU models.
Wiring diagrams and component lists for PU42EK7 series models.
Illustrates the refrigerant system for PU12EK, PU18EK, PU24EK models.
Shows the refrigerant system for PU30EK, PU36EK, PU42EK models.
Details the protection functions and controls managed by the outdoor microprocessor.
Explains protection mechanisms like phase error, overcurrent, and high pressure switch.
Explains using SW1, SW2, SW3 to display output state and check codes via LEDs.
Details check codes and their corresponding diagnosis, cause, and check points.
Lists check codes, malfunction diagnosis, causes, and check points.
Lists common causes and check points when the outdoor unit fails to operate.
