Mitsubishi PUY-A36NHA6 - 10-3. HOW TO PROCEED SELF-DIAGNOSIS

31
F1 F2 F3 F4
unem ecivreS
rosruC
:unem niaM
Test run
Input maintenance info.
Function setting
Check
Self check
F1 F2 F3 F4
kcehc fleS
:tceleS
Ref. address
sserddA
F1 F2 F3 F4
kcehc fleS
Ref. address
Return:
teseR
Error Unt # CI.prG
F1 F2 F3 F4
Self check
Return:
Reset
Ref. address 0
Error Grp.
--
-
Unt#
--
When there is no error history
F1 F2 F3 F4
Self check
Delete error history?
Ref. address
Cancel OK
F1 F2 F3 F4
Self check
Return:
Ref. address
Error history deleted
2
 Withthe
F1
or
F2
button,entertherefrigerantaddress,andpressthe button.
Select"Selfcheck"withthe F1 or F2 button,andpressthe button.
1
Select"Service"fromtheMainmenu,andpressthe button.
3
Checkcode,unitnumber,attributewillappear.
"-"willappearifnoerrorhistoryisavailable.
4
Resettingtheerrorhistory.
Pressthe
F4
button(Reset)onthescreenthatshowstheerrorhistory.
Aconrmationscreenwillappearaskingifyouwanttodeletetheerrorhistory.
Pressthe
F4
button(OK)todeletetheerrorhistory.
Ifdeletionfails,"Requestrejected"willappear.
"Unitnotexist"willappearifnoindoorunitsthatarecorrespondtotheentered
addressarefound.
Navigating through the screens
•TogobacktotheMainmenu..........
button
•Toreturntothepreviousscreen.......
button
10-3. HOW TO PROCEED "SELF-DIAGNOSIS"
10-3-1. Self-diagnosis <PAR-30MAA> <PAR-31MAA>
OCH577A