Mitsubishi Q00JCPU - File-Write in RUN

6
FUNCTIONS
6.12 Writing in Program during CPU Module RUN
6.12.2 File-write in RUN
6 - 81
1
Overview
2
Performance Specification
3
Sequence Program Configuration and Execution Conditions
4
I/O Nunber Assignment
5
Memories and Files Handled by CPU Module
6
Functions
7
Communication using built-in Ethernet ports of CPU module
8
Communication with Intelligent Function Module
6.12.2 File-write in RUNNote26
(1) File-Write in RUN function
The file-write in RUN function is used to write a batch of files to the CPU module as
shown in Table6.28.
: Writable data, : Unwritable data, : Restricted
* 1 : Writable only when not being accessed by a sequence program.
* 2 : Writable for the Universal model QCPU.
Note26
Table6.28 Files that can be written during RUN by the CPU module
Memory Name
CPU module built-in memories
Memory
Card (RAM)
Memory Card (ROM)
Program
Memory
Standard
RAM
Standard
ROM
SRAM Card Flash Card ATA Card
Parameter
Intelligent function
module parameter
Program
*2
Device comment
*1*2 *1 *1
Device initial
value
File register
*1 *1
Local device
Sampling trace
file
Failure history
data
PLC user data
*2
Figure 6.54 Outline of file-write in RUN
Basic
Note6.24
The Basic model QCPU cannot execute file-write in RUN.
Basic
Note6.24
GX Developer
Writing of program
file A
Program file A