Mitsubishi Q00JCPU - Remote Password

9
PARAMETERS
9.4 Remote Password
9 - 41
9
Parameters
10
Device Explanation
11
CPU Module Processing Time
12
Procedure for Writing Program to CPU ModuleAppendicesIndex
9.4 Remote Password
This section explains the remote password-related parameter list and parameter details.
Set the remote password of the Ethernet module, serial communication module, modem
interface module and Built-in Ethernet port QCPU.
Figure 9.31 Remote password setting screens
Table9.35 Remote password setting list
Item Parameter No. Description Setting range Default value Reference
Password settings ---- Enter the remote password.
Within 4 characters
(alphanumeric characters,
special symbols).
----
• QnUDE(H)CPU :
Section 7.7
• QJ71E71 :
Manuals of the
Ethernet module
• QJ71C24 :
Manuals of the
serial
communication
module
• QJ71CMO :
Manuals of the
modem interface
module
Password
active mod-
ule settings
Model
name
----
Select the module model name
that will be checked for the
remote password set to the CU
module.
QnUDE(H)CPU
QJ71E71
QJ71C24/CMO
----
Start XY ----
Set the starting address of the
module checked for the remote
password.
<Basic model QCPU>
0000
H to 03E0H
<High Performance model
QCPU, Process CPU,
Redundant CPU, Universal
model QCPU>
0000
H to 0FE0H
----
Detail ----
Set the remote password details
in the QJ71E71.
--
----
User connection No. ---- Set the user connection No. Connection 1 to 16 ----
System connection ----
Specify the remote password-
valid port of the system
connection.
Specify the remote password-
valid port.
• Auto open UDP port
• FTP transmission port (TCP/
IP)
• GX Developer transmission
port (TCP/IP)
• GX Developer transmission
port (UDP/IP), Dedicated
instruction, CC IE Control,
MNET/10(H) relay transmis-
sion port.
•HTTP port
----