9
Mitsubishi Electric Melsec-Q Ethernet (UDP) Driver
6 Driver Configuration
Use the [Driver Configuration] dialog box to define communication settings on the target
machine.
For information on how to display the [Driver Configuration] dialog box,
see the online help.
Command Time Interval
Not applicable.
Timeout
Defines the length of time the target machine waits for a communication packet before it retries
communication or outputs an error. (1-180)
UDP Retry Count
Defines the number of times the target machine resends a packet before it outputs an error. (0-
255)
UDP Port No.
Enter a value to identify on the target machine, the port number used for UDP communication.
(1024-65535)
To Next Page
Loading...
Need help?
General
