36
4.4 Precautions when Connecting the Uninterruptible Power Supply (UPS)
Connect the Q2ASCPU system to the uninterruptible power supply (UPS), while
paying attention to the followings.
Use the on-line UPS or line interactive UPS (voltage distortion of 5% or less.)
Alternatively, use the off-line UPS, i.e., FREQUPS-F series with serial number P or
later (Mitsubishi).
Example: FW-F10-03.K/0.5K
Do not use the off-line UPS other than above.
To Next Page
Loading...
