8-19
Chapter 8 PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
Starter - Inspect
Visually check the starter for damage.
If the starters are dusty, blow foreign material using
compressed air.
Note: If the starters are defective, consult a dealer of
Mitsubishi Heavy Industries, Ltd.
Fig. 8-29 Starter - Inspect
Alternator - Inspect
Visually check the alternator for damage.
If the starters are dusty, blow foreign material using
compressed air.
Remove the belt, and turn the pulley by hand to make
sure that it rotates smoothly.
Note: If the alternators are defective, consult a dealer
of Mitsubishi Heavy Industries, Ltd.
Fig. 8-30 Alternator - Inspect
Starter
Alternator
To Next Page
Loading...
