Need help?Do you have a question about the Mitsubishi SRK 35ZS-W and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 7.2 |
| Noise Level (Outdoor Unit) | 49 dB(A) |
| Refrigerant | R32 |
| Type | Split System |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Power Supply | 220-240V, 50Hz |
Step-by-step guide for diagnosing and fixing issues when the unit fails to start.
Guide for troubleshooting problems when the unit is operational but malfunctioning.
Table detailing self-diagnosis codes and their meanings.
Information on accessing the service mode for diagnostics and troubleshooting.
Procedures for inspecting specific issues identified during troubleshooting.
Illustrates the wireless remote control and its dimensions.
Shows the electrical wiring diagram for indoor units.
Presents the electrical wiring diagram for outdoor units.
Displays sound power levels for indoor and outdoor units across frequencies.
Shows sound pressure levels for indoor units at various frequencies and modes.
Chart for selecting cooling and heating capacity based on conditions.
Covers safety precautions and guidelines for indoor unit installation.
Guidelines for choosing the optimal installation location for the indoor unit.
Instructions for securely mounting the indoor unit's installation board.
Details on preparing and connecting electrical wiring for the unit.
Steps for attaching the indoor unit to the installation board.
Provides safety precautions and installation guidelines for outdoor units.
Crucial safety warnings and precautions for outdoor unit installation.
Criteria for selecting an appropriate installation location for the outdoor unit.
Specifies required clearances and installation space for the outdoor unit.
Instructions for properly installing the outdoor unit on its base.
Detailed procedure for connecting refrigerant pipes, including material selection and flaring.
Overview of functions and buttons on the wireless remote control.
How to adjust flap and louver for optimal air flow direction.
Describes the 3D auto operation for efficient room conditioning.
Explains component operation during heating mode.
To Next Page