EasyManua.ls Logo

Mitsubishi SRK35ZMP-S

Mitsubishi SRK35ZMP-S
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TECHNICAL MANUAL
INVERTER WALL MOUNTED TYPE
RESIDENTIAL AIR-CONDITIONERS
(Split system, air to air heat pump type)
SRK25ZMP-S
SRK35ZMP-S
SRK45ZMP-S
Manual No.'13•SRK-T-140
Question and Answer IconNeed help?

Do you have a question about the Mitsubishi SRK35ZMP-S and is the answer not in the manual?

Mitsubishi SRK35ZMP-S Specifications

General IconGeneral
Cooling Capacity3.5 kW
Heating Capacity4.0 kW
Power Supply220-240 V, 50 Hz
RefrigerantR410A
TypeSplit System
Seasonal Energy Efficiency Ratio (SEER)6.10
Outdoor Unit Dimensions (W x H x D)780 x 540 x 285 mm

Summary

Product Specifications

General Specifications Overview

Covers power, dimensions, noise, safety, and remote control specs for SRK25ZMP-S.

SRK35 ZMP-S Model Specifications

Technical data and specifications for the SRK35ZMP-S model.

SRK45 ZMP-S Model Specifications

Technical data and specifications for the SRK45ZMP-S model.

Electrical Systems and Piping Configurations

Operational Performance and Limitations

Installation Procedures and Safety Guidelines

Installation Safety Precautions

Critical safety warnings and precautions for all installation work.

Indoor Unit Installation Steps

Detailed process for mounting, wiring, and preparing the indoor unit.

Outdoor Unit Installation and Piping Connection

Steps for installing the outdoor unit and securely connecting refrigerant pipes.

Operation Control and Modes Explained

System Protection and Control Functions

Dew Prevention and Frost Protection Controls

Functions preventing condensation on the indoor unit and frost on the outdoor unit.

Maintenance and Troubleshooting Procedures

Maintenance Cautions and Pre-Troubleshooting Checks

Safety advice and essential checks before starting maintenance or troubleshooting.

Troubleshooting: Unit Not Running

Step-by-step guide to diagnose and resolve issues when the unit does not start.

Troubleshooting: Unit Running Issues

Diagnostic procedures for problems occurring while the unit is operating.

Self-Diagnosis and Error Code Interpretation

How to read and understand error codes displayed by the unit's self-diagnosis system.

Service Mode Diagnostics and Data

Accessing and interpreting service data, including past errors and protective stops.

Component Inspection and Specific Fault Diagnosis

Related product manuals