– 4 –
Choice of operations and features
Choice of operations
Page 9
Drying by extracting damp from the room.
Page 9
Cooling by extracting heat from the room.
COOL
DRY
Page 9
The unit draws in heat from the outside air,
transfers it inside and heats the room.
HEAT
Functioning of micro-computer depends on
setting and room temperatures. It dehumidi-
fies while keeping room temperature almost
constant.
Page 8
Automatic selection of operating mode.
Page 9
Fanning by circulating room air.
The Auto mode automatically selects the
operation mode (HEAT, COOL or DRY),
depending on the room temperature when
switched on.
Characteristics
Amenity facility
TIMER procedure HI POWER mode
Page 12
When using the timer to switch on, the sys-
tem become operational shortly before the
set time, depending on the room tempera-
ture so that the desired temperature is
reached at the set time.
Page 11,12
There are two timers, for ON and OFF.
They can be set as desired.
Page 9
Turning up the power operates the air-condi-
tioner in the power cooling and heating
mode.
Page 10
Adjustment of
airflow
• AIR SCROLL
This function sets the unit at the most suitable angle
for blowing, imitating a natural breeze.
• MEMORY FLAP
Once the flap position has been set, the unit will
memorise it and continue in the same position the
next time.
Page 9
This is an economic and healthy level of op-
eration.
ECONOMY mode
AUTOFAN
RKT012A754_En.p65 05.9.14, 1:42 PM4
To Next Page
Loading...
Need help?
General
