Mitsubishi TDJ430D - Controller Installation Inside Panel (Option)

(8) Installation of controller at inside panel (option)
(a) Applicable for Mitsubishi FK, FM vehicles of Model '92 and following
Notes:
1. This installation drawing of controller is for Mitsubishi FK, FM which is available after '92 model.
2. Installation procedure
(1) Remove the center panel.
(2) Remove the accessory box with center panel.
(Remove and discard the lower accessory box)
(3) Bracket (RH: TJF116A053), (LH: TJF116A053A) and accessory must be attach securely to the controller with
screw.
(4) Insert the connector to the controller.
(5) Fix the controller assy in the inside panel with screw (H071D05X014).
(6) Install center panel.
(7) Install control panel (TJF133A001) (Center panel insertion)
– 83 –