Combination headlamps and dipper switch
5-44 Instruments and controls
5
E00532702101
If the operation mode of the power switch
is put in OFF or ACC while the lamp
switch is in the “ ” position, the lamps
are automatically turned off when the
driver’s door is opened.
If the operation mode of the power switch
is put in OFF or ACC while the lamp
switch is in the “ ” position, the lamps
are automatically turned off if the driver’s
door then remains closed for approxi-
mately 3 minutes.
1. Turn the lamp switch to the “AUTO”
position while the operation mode of the
power switch is in OFF or ACC.
2. Turn on the lamps with the switch in the
“ ” or “ ” position again, then the
lamps will remain on.
E00506102058
If the driver’s door is opened when the opera-
tion mode of the power switch is in ACC or
OFF while the lamps are on, a buzzer will
sound to remind the driver to turn off the
lamps.
In both cases, the buzzer will automatically
stop in the following conditions:
The auto-cutout function is activated.
The lamp switch is turned to the “AUTO”
position.
The door is closed.
E00530601965
The daytime running lamps come on when
the Hybrid EV System is operating and the
lamp switch is in the “AUTO” position and
the tail lamps are off.
When the headlamps are turned off by the
automatic on/off control with the operation
mode of the power switch in ON, the front
fog lamps also go off. When the headlamps
are subsequently turned back on by the auto-
matic on/off control, the front fog lamps also
come on.
Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windscreen.
If the lamps do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch and we recommend you to
have your vehicle checked.
Lamps (headlamps, fog lamp,
etc.) auto-cutout function
The lamp auto-cutout will not function when
the lamp switch is in the “ ” position.
The lamp auto-cutout function can also be
disabled.
For further information, please contact an
authorised MITSUBISHI MOTORS dealer.
When you want to keep the lamps
on:
Lamp monitor buzzer
Daytime running lamps