Quick guide
Overview/Quick guide 1-12
1
E08502200053
When you park your vehicle, be sure to apply
the Electric parking brake and press the elec-
trical parking switch to shift to the “P”
(PARK) position and lock the wheels. The
select position indicator displays “P” on the
instrument cluster.
Refer to “Electrical parking switch” on
page 6-21.
Your vehicle has the function that automati-
cally shifts the select position to the “P”
(PARK) position when the operation mode of
the power switch is put in OFF.
If you need to set the select position to the
“N” (NEUTRAL) position when parking,
perform the following procedure.
1. Stop your vehicle completely.
2. Press the electrical parking switch to shift
to the “P” (PARK) position while depress-
ing the brake pedal.
3. Place chocks or blocks at the tyre.
4. While depressing the brake pedal, con-
tinue to press the electrical parking switch
(A) and move and hold the selector lever
(B) toward the front or rear of the vehicle
for 3 seconds or longer.
A buzzer will sound and the following
display is appeared on the information
screen in the instrument cluster to indicate
that the procedure is complete.
5. Press the power switch to stop the Hybrid
EV System.
Refer to “How to disable the function that
automatically shifts the select position to
the “P” (PARK) position when the opera-
tion mode of the power switch is put in
OFF” on page 6-22.
Electrical parking switch
How to disable the function that
automatically shifts the select posi-
tion to the “P” (PARK) position
when the operation mode of the
power switch is put in OFF
To Next Page
Loading...
Need help?
General
