Electric window control
Locking and unlocking 3-23
3
The driver’s switches can be used to operate
all door windows. A window can be opened
or closed by operating the corresponding
switch.
Press the switch down to open the window,
and pull up the switch to close it.
If the switch for the driver’s window is fully
pressed down/pulled up, the door window
automatically opens/closes completely.
If you want to stop the window movement,
operate the switch lightly in the reverse direc-
tion.
The passenger’s switches can be used to
operate the corresponding passenger’s door
windows.
Press the switch down for opening the win-
dow, and pull up the switch for closing.
E00303102749
When this switch is operated, the passenger’s
switches cannot be used to open or close the
door windows and the driver’s switch cannot
open or close any door windows other than
the driver’s door window.
To unlock, push it once again.
E00302402325
The door windows can be opened or closed
for 30 seconds after the Hybrid EV System is
stopped.
Before operating the electric window con-
trol, make sure that nothing is capable of
being trapped (head, hand, finger, etc.).
Never leave the vehicle without removing
the key.
Never leave a child (or other person who
might not be capable of safe operation of
the electric window control) in the vehicle
alone.
Driver’s switches
Passenger’s switches
Repeated operation with the Hybrid EV Sys-
tem stopped will run down the auxiliary bat-
tery. Operate the window switches only
while the Hybrid EV System is operating.
The rear door windows only open halfway.
Lock switch
1- Lock
2- Unlock
A child may tamper with the switch at the
risk of its hands or head being trapped in
the window. When driving with a child in
the vehicle, please push the window lock
switch to disable the passenger’s switches.
Timer function
To Next Page
Loading...
Need help?
General
