Child restraint
Seat and seat belts 4-21
4
The child restraint system is designed only
for seats that incorporate lower anchorages.
Retain the child restraint system using the
lower anchorages.
It is not necessary to retain the child restraint
system using the vehicle’s seatbelts.
1. Remove any foreign material in or around
the connectors and ensure the vehicle seat
belt is in its normal storage position.
2. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint system.
Refer to “Head restraints” on page 4-8.
3. When installing a child restraint system,
slide the seat to the rearmost position.
4. Open the gap a little with your hand to
expose the lower anchorages (A).
5. Push the child restraint system’s connec-
tors (B) into the lower anchorages (A) in
accordance with the instructions provided
by the child restraint system’s manufac-
turer.
Child restraint anchorages are designed to
withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seatbelts, harnesses or for attaching
other items or equipment to the vehicle.
Child restraint system with ISO-
FIX mountings
A: Child restraint system connectors
To install
Do not remove the head restraint when
installing a booster cushion.
To Next Page
Loading...
Need help?
General
