Mitsubishi XPANDER HEV 2023 User Manual

Instruments
5-12 Instruments and controls
5
E00578300136
You can switch the mph speed indicator
ON/OFF.
1. Change to function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Sub Unit Speed” (sub
unit speedometer setting), press the Enter
switch to switch the mph speed indicator
ON/OFF.
E00578500125
The time until the display appears can be
changed.
1. Change to the function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Rest Reminder” (rest
reminder setting), press the Enter switch.
3.Turn off or select the time until your
desired break and press the Enter switch.
It will be changed to OFF or the desired
time.
E00578600054
It is possible to change the turn-signal sound.
1. Change to the function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Turn Signal Sound”
(turn- signal sound setting), press the
Enter switch.
3. Select the sound and press the Enter
switch.
The setting changes to the selected turn-
signal sound.
E00578700055
You can turn the operation sound ON/OFF.
1. Change to the function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Operation Sound” (oper-
ation sound setting), press the Enter
switch to turn the operation sound
ON/OFF.
 Changing the sub unit speedometer dis-
play
Type 1
Type2
mph or not displayed
mph or not displayed
 Changing the time until “REST
REMINDER” is displayed
NOTE
 The drive time is reset when the operation
mode of the power switch is put in OFF.
 Changing the turn-signal sound
 Operation sound setting
NOTE
 The operation sound setting only deactivates
the operation sound of the digital driver dis-
play switches. The warning display and other
sounds cannot be deactivated.

Mitsubishi XPANDER HEV 2023 Specifications

General

Brand	Mitsubishi
Model	XPANDER HEV 2023
Category	Automobile
Language	English