Mitsubishi XPANDER HEV 2023 User Manual

Instruments
Instruments and controls 5-13
5
E00578800043
The language of the 8 inch digital driver dis-
play can be switched.
1. Change to the function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Language” (language set-
ting), press the Enter switch.
3. After selecting the language you want to
set up, press the Enter switch.
It changes to the language that you set.
E00578900057
The display unit for fuel consumption and
outside temperature can be switched.
1. Change to the function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Unit” (fuel consumption
display setting and temperature unit set-
ting), press the Enter switch.
3. After selecting the item you want to set,
press the Enter switch.
E00579300117
The distance and speed units are also
switched in the following combinations to
match the selected fuel consumption unit.
E00579200161
Many of the function setting can be returned
to their factory settings.
1. Change to the function setting display.
Refer to “Function setting display” on
page 5-11.
2. After selecting “Factory Reset” (returning
to the factory setting), press the Enter
switch.
3. Press the Enter switch for more than
5 seconds on the Reset screen. The buzzer
sounds and the setting returns to the fac-
tory default.
 Changing the display language
NOTE
 If “---” is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
 Changing the fuel consumption display
unit and the temperature unit
[When “Fuel Consumption” is selected]
NOTE
 The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
switched, but the units for the indicating nee-
dle (speedometer), the odometer and the trip-
meter will remain unchanged.
Fuel con-
sumption
Distance
(driving
range)
Speed
(average
speed)
km/L km km/h
L/100km km km/h
MPG (US) mile (s) mph
MPG (UK) mile (s) mph
 Returning to the factory settings
NOTE
 The factory settings are as follows.
• “Display setting”: Type 1
• “Sub Unit Speed”: OFF
• “Rest reminder”: OFF
• “Turn-signal sound setting”: Sound 1
• “Operation sound setting”: ON
• “Display language”: THAI
• “Fuel consumption display unit”: L/100km
• “Temperature unit”: °C
 The “Driver Assistance” and “Maintenance”
settings cannot be returned to the factory set-
tings.

Mitsubishi XPANDER HEV 2023 Specifications

General

Brand	Mitsubishi
Model	XPANDER HEV 2023
Category	Automobile
Language	English