Mitutoyo ARK-600 - Machine Preparation and Component Attachment

15. R emove the string which secures the loading
lever ( Fig.7 ) .
16. R e move non-tarnish paper ( Fig.8 )
Non-tarnish paper
( Fig.7 )
{ Fig.8 )
17. Lower the elevating handle to remove the protection
tube and non-tarnish paper ( Fig.9 ).
18. Attach the illuminating lamp ( Fig.9 ).
Illuminating lamp
Protection tube
Non-tarnish paper
19. A ttach the anvil ( or the table ) ( Fig.10 )
Beware not to allow any dust to enter
between the elevating screw and
the anvil ( or the table ).
( Fig.9 )
8
( Fig.10 )