Mitutoyo ARK-600 - AUTO Mode Operation Steps

4) Stop the handle operation as soon as
4 LEDs light up.
onnn
OK
360.0
NG
- 370.0
If the preliminary test force is
overloaded, the overloading lamp
will light up and the hardness
indicator will display “ RRRR ".
In this case, lower the specimen,
change its position, and retry.
5) Press the START switch to start the test
force sequence. The sequence of loading,
duration, and unloading will be
automatically performe'd.
Hardness indicator will preset.
The loading lamp will light' up.
OK
100.0
NG
av a V
U-O DV
4 LEDs will flash.