Mitutoyo TM-500 Series - Page 40

7. Optional Accessories
38

176-127 Reticle (Template) Unified screw thread NF80㨪28TPI
176-128 Reticle (Template) Unified screw thread NF24㨪14TPI
176-129 Reticle (Template) Unified screw thread NF13㨪10TPI
176-130
Reticle (Template) Involute gear tooth m0.1㨪1.0 pressure 14” 30’ ,
reference rac
k
176-135 Reticle (Template) Concentric circles Ǿ.01” pitch, maximum diameter Ǿ.2”
176-140 Reticle (Template) ISO metric screw thread p=0.075㨪0.7
176-141 Reticle (Template) ISO metric screw thread p=0.75㨪2.0
176-142 Reticle (Template) ISO unified screw thread 80㨪28TPI
176-143 Reticle (Template) ISO unified screw thread 24㨪14TPI
176-144 Reticle (Template) ISO unified screw thread 13㨪10TPI
990561 Chart clip (for XY stage)
176-366
Fiber-optic circular illumination unit
176-344
Twin fiber optics illumination unit, twin fiber-optic illuminator
264-140ٌ
2D
data processing unit QM-Data200
164-161
Digimatic micrometer head MHD-50M
164-162
ً
Digimatic micrometer head MHD-2M
937387 ً
Connecting cable (1m): connect between MHD-50M and MUX-10F
965013 ً
Connecting cable (2m): connect between MHD-50M and MUX-10F
264-002 ً MUX-10F
12AAD194 ً
Connecting cable C: connect between MUX-10F and QM-Data200
: The order number differs depending on the shipping destination.
ٌ: When using QM-Data200 it also requires MDH-50M (2 units), connecting cables (2 pcs of either
length), MUX-10F and connecting cable C.