Mitutoyo TM-500 Series - 8. Reference Diagrams; TM-505;505 R XY Stage Diagram






Optional Accessories
㪎



OrderNo. Name
176-105 Swivel-center support㧔for TM-505/TM-505R㧕
172-197 Swivel-center support 㧔for TM-510/TM-510R㧕
176-106 Rotary table㧔for TM-505/TM-505R㧕
172-196 Rotary table 㧔for TM-510/TM-510R㧕
176-107 Holder with clamp
172-378 V-block with clamp
176-203 Twin-bulb surface illumination unit
176-204 Height measurement attachment
176-115 Eyepiece 10
176-117 Eyepiece 20
176-137 Objective 10
176-139 Objective 5
176-109 Reticle (Template) Metric screw p=0.25㨪1.0
176-110 Reticle (Template) Metric screw p=1.25㨪2.0
176-111 Reticle (Template) Concentric circles Ǿ0.05㨪4.00mm
176-112
Reticle (Template) Involute gear tooth m0.1㨪1.0, pressure angle 20q
reference rac
k
176-113 Reticle (Template) 55qangle line
176-114 Reticle (Template) 60qangle line
176-120 Reticle (Template) Whiworth screw thread (inch) 60㨪26TPI
176-121 Reticle (Template) Whiworth screw thread (inch) 24㨪18TPI
176-122 Reticle (Template) Whiworth screw thread (inch) 16㨪11TPI
176-123 Reticle (Template) Unified screw thread 80㨪28TPI
176-124 Reticle (Template) Unified screw thread 24㨪14TPI
176-125 Reticle (Template) Unified screw thread 13㨪10TPI

7. Optional Accessories 37