What causes a build error on my µ-Dimension 3D Printer?
A build error on your µ-Dimension 3D Printer can be caused by a partial or bad part file sent to the system. Check the STL file validity in CAD software; reprocess the STL in Catalyst and re-download it to the system.
What to do if the µ-Dimension 3D Printer system fails to reach operating temperatures?
If the µ-Dimension 3D Printer system fails to reach operating temperatures, verify the system is not connected to an extension cord or power strip.
What to do if my µ-Dimension 3D Printer shows Unload Error Unload failed?
General| Brand | µ-Dimension |
|---|---|
| Model | 180-00108 uPrint |
| Category | 3D Printers |
| Language | English |
Explains safety classifications, warnings, and hazard symbols used in the manual.
Guides on opening, scaling, orienting, and printing STL files.
Instructions for starting, pausing, resuming, canceling builds, and removing completed parts.
Procedures for emptying purge buckets, replacing material spools, and managing material bays.
Provides solutions for common problems and error messages based on a checklist.
Guides on identifying loss of extrusion and clearing clogged extrusion tips.
Procedures for replacing tip wipe assembly, tip shields, and extrusion tips.
Detailed steps for calibrating extrusion tips after replacement for optimal performance.
To Next Page
