MKN London 2 Series - User Manual

Questions and Answers

D
Donna JamesAug 5, 2025
Why is my MKN Fryer not heating up?
- A
  Annette HarrisAug 5, 2025
  If your MKN Fryer isn't heating up, there could be several reasons. First, ensure that the unit is switched on and the temperature control knob is properly set, and not in the " " position. If the issue persists, it might be due to a defective unit, an interruption in the power supply, or a defective temperature control knob or heating element. In such cases, contact the authorized technical personnel or customer service after disconnecting the unit from the electric mains.
L
levictorAug 9, 2025
What to do if my MKN London 2 does not react?
- M
  Mr. Austin Davila IIAug 9, 2025
  If your MKN Fryer isn't responding, it could be due to a defective operating element, a blown fuse, or the ambient temperature being below 0 °C, which may have tripped the safety temperature limiter. Disconnect the unit from the electric mains and contact customer service for assistance.
R
Robert HarringtonAug 13, 2025
Why does my MKN London 2 Fryer have insufficient heat output?
- J
  johnchapmanAug 13, 2025
  If your MKN Fryer isn't producing enough heat, the heating element might be defective, or there could be a missing mains phase. In either case, disconnect the unit from the electric mains, and then contact customer service or authorized technical personnel for assistance.
C
Christian CainAug 17, 2025
What to do if my MKN London 2 Fryer makes an intermittent audible signal?
- J
  Joseph JonesAug 18, 2025
  If your MKN Fryer is emitting an intermittent audible signal, it indicates that the operating temperature has been exceeded or the oil level is too low. Acknowledge the fault and check the oil level.
A
Aaron BoydAug 22, 2025
Why does my MKN Fryer keep switching off?
- J
  Jacqueline CannonAug 22, 2025
  If your MKN Fryer switches off unexpectedly, it is likely due to a lack of mains voltage. Contact the authorized technical personnel.
G
gwellsAug 27, 2025
What to do if the heating indicator light does not illuminate on my MKN Fryer?
- R
  Richard ComptonAug 27, 2025
  If the heating indicator light on your MKN Fryer isn't lighting up, it could mean that the unit or the heating indicator light itself is defective. Disconnect the unit from the electric mains and contact customer service.
N
Nicholas ChenAug 31, 2025
What does a continuous sound from my MKN Fryer mean?
- M
  Martin ThomasAug 31, 2025
  If your MKN Fryer is emitting a continuous audible signal, it indicates that the safety temperature limiter has tripped. Disconnect the unit from the electric mains and contact customer service.