MKN Paris Series User Manual (English)

Questions and Answers:

M
Margaret AdamsAug 1, 2025
Why is my MKN Paris Fryer not heating up?
- C
  Cheryl MirandaAug 1, 2025
  If your MKN Fryer isn't heating up, there could be several reasons. First, ensure that the unit is switched on and the temperature control knob is properly set, and not in the " " position. If the issue persists, it might be due to a defective unit, an interruption in the power supply, or a defective temperature control knob or heating element. In such cases, contact the authorized technical personnel or customer service after disconnecting the unit from the electric mains.
S
Samuel HarmonAug 5, 2025
What to do if my MKN Paris Fryer does not react?
- J
  Joseph SmithAug 5, 2025
  If your MKN Fryer isn't responding, it could be due to a defective operating element, a blown fuse, or the ambient temperature being below 0 °C, which may have tripped the safety temperature limiter. Disconnect the unit from the electric mains and contact customer service for assistance.
P
Paul SpencerAug 9, 2025
Why does my MKN Paris have insufficient heat output?
- R
  robert69Aug 9, 2025
  If your MKN Fryer isn't producing enough heat, the heating element might be defective, or there could be a missing mains phase. In either case, disconnect the unit from the electric mains, and then contact customer service or authorized technical personnel for assistance.
G
Grace JohnsonAug 14, 2025
What to do if my MKN Fryer makes an intermittent audible signal?
- C
  curtis19Aug 14, 2025
  If your MKN Fryer is emitting an intermittent audible signal, it indicates that the operating temperature has been exceeded or the oil level is too low. Acknowledge the fault and check the oil level.
J
James WongAug 17, 2025
Why does my MKN Paris keep switching off?
- J
  Jack RamirezAug 18, 2025
  If your MKN Fryer switches off unexpectedly, it is likely due to a lack of mains voltage. Contact the authorized technical personnel.