I. Overview
MKS-TFT28/32 is color touch screen, researched and developed by Makerbase developers, which is suitable for open sourced
3D printers. It can work with MKS Base, MKS Gen, MKS Sbase and so on. Compared to TFT32, TFT28 supports external DC
12V and works with Ramps1.4.
II. Main Features
Support 5 languages online switching.
2.8/3.2-inch color touch screen , support U disk and SD card.
Reserve wifi interface,support wifi function by adding wifi module.
Three themes, two styles, provide the users with more choices.
Allowed to self-design the interface of booting logo and all buttons.
Allowed to add at most 13 customized function buttons.
Update the configuration and firmware by SD card, easily operate.
Work with MKS series controller board developed by Makerbase, TFT28 can work with Ramps 1.4 too.
Support “print from breakpoint”, “print from power outage” and “filament outage detection” function.
Support “auto off after printing finishes” function with MKS PWC module.
III. Connection and Dimension
1.MKS TFT28/32 Physical Map
To Next Page
Loading...