Mobit U11 - Security Settings; Phone Lock Setup

35
selected network must have a roaming agreement with your domestic network.
9.4.2 Network mode
You can select GSM, WCDMA or auto as the network mode.
9.4.3 Dial Up setting
This function enables you to set the details of connecting your phone to the network.
Note: Exact parameters should be provided by your network operator. All options
depend on the service provider and the services you subscribed. The error message
occurred during network access primarily can be attributed to wrong parameters setting.
At the first time, contact your network service provider to obtain detail information. Some
service providers may send the network access parameter via SMS. Some pre-configured
modes may be blocked so as to refuse resetting and renaming.
9.5 Security settings
9.5.1 Phone lock
Select On or Off.
When you select On, your mobile phone will be secured from unauthorized use. The
default password is “0000”. If you forget this code, consult with your service provider.
To modify the mobile phone lock password, you can use the Edit password function.