Step 1.
Place Glass Grounds Container Lid (F)
in position.
Place Glass Grounds Container (E)
underneath the Dispensing Spout (H).
Fill Hopper (B) with coee beans.
Place Hopper Lid (A) on top of the hopper.
Step 2.
Insert Power Plug (C) into a grounded outlet.
Press and hold the Power Switch (D)
until you have ground the desired amount
of coee.
Note: Do not fill the glass grounds container past
the bottom of the Moccamaster logo (approx. 110
grams). Allowing the container to overflow may
result in the grinder motor jamming.
Step 3.
Remove the Glass Grounds Container
from underneath the Dispensing Spout
and take o the Lid.
H
Step 4.
Measure or weigh your grounds
and transfer to your prepared brew
basket or coee brewer. If you have
leftover grounds, seal the grounds
container with Storage Lid (G).
D
A
F
B
You're ready to
brew great coee!
E
How to Grind
C