MOCK Mockmill 100 User Manual

9
GETTING STARTED AND CLEANING
Initial start-up:
Before you use your Mockmill for the first time, please remove the
transport locking device (applies only to Mockmill 200). Instructions
can be found on p. 13.
Before first use
Please mill a handful of grain and then discard the flour. This will
remove any mineral debris from the manufacturing process on the
milling stones.
Getting started
1. Connect the plug to the power socket.
2. Place a bowl beneath the chute.
3. Select milling grade.
4. Switch on the mill.
5. Add grain to the hopper.
After milling, switch the mill off.
Cleaning
The milling stones clean themselves if you select a coarse setting from
time to time. If the mill is not to be used for a while (extended vacation,
for example), we recommend removing flour residues by milling on a
coarser setting. Please see “How to clean the Mockmill” on p. 7.
FURTHER OPERATING INSTRUCTIONS
On our homepage mockmill.com you will find videos containing
further operating instructions under Service / Help on mockmill.com
DE
EN

MOCK Mockmill 100 Specifications

General

Brand	MOCK
Model	Mockmill 100
Category	Kitchen Appliances
Language	English