MOCK Mockmill User Manual

19
TROUBLESHOOTING
In the unlikely event that you experience a problem with your
Mockmill, or should you have any questions as to how it works,
please call us or send us an e-mail to info @ mockmill.com (USA and
Canada support@mockmill.com). Our experts can solve virtually all
problems on the phone.
Listed below are some possible problems and how they can be
usually resolved.
The mockmill is humming, but it does not mill
Turn off the Mockmill and adjust the lever to position 10. Turn the
Mockmill on. The milling should start again. If it does not unplug the
Mockmill. Remove the grains from the hopper carefully turn the Mockmill
upside down. The Mockmill can then be opened as described on page
10. Remove any residuel material . The Mockmill can now be put back
together as described on p. 10. The problem should now be resolved. If
the stones are not clean of any film, follow instructions on p. 7
Please make sure that you always switch the Mockmill first and then
fill with grains, and always allow your Mockmill to finish the milling
job completely.
Mockmill does not mill fine
Adjust the Mockmill as described on p. 17, taking care to note the
ticking sound of first stone contact.
Important: Please make certain that the adjustment is and remains
screwed in tightly during adjustment.
DE
EN

MOCK Mockmill Specifications

General

Brand	MOCK
Model	Mockmill
Category	Kitchen Appliances
Language	English