10
Pairing with a Mac computer
Note: Before you pair the headphones with the computer, make sure that the
computer is Bluetooth compatible. Refer to the computer's documentation or
contact the computer manufacturer for more information. If your computer is not
Bluetooth compatible, install a Bluetooth USB adapter (dongle).
1
Turn on Bluetooth on the computer. For instructions, see the computer's
documentation or contact the computer manufacturer.
2
Click the Bluetooth status menu.
3
Click Set up Bluetooth Device. The Bluetooth Setup Assistant opens.
4
Click Continue.
5
Select Headset as the device type, then click Continue.
6
With the headphones turned off, press and hold
(power/talk) for four
seconds. The LED blinks blue and red rapidly, then pairing mode is
activated.
7
Select MD-HPBT01, then click Continue. The computer gathers
information.
8
Click Continue.
9
Enter 0000 (four zeros) into the Passkey field, then click Continue.
10
Click Quit to finish.
Note: To use the headphones, they must be selected as the default input and output
device on the computer.
11
Click System Preferences, then click Sound.
12
Under Input, select MD-HPBT01, then under Output, select
MD-HPBT01.
Using your stereo headphones with Skype
Note: Before you pair the headphones with the computer, make sure that the
computer is Bluetooth compatible. Refer to the computer's documentation or
contact the computer manufacturer for more information. If your computer is not
Bluetooth compatible, install a Bluetooth USB adapter (dongle).
1
Turn on your Bluetooth headphones, then right-click the Bluetooth icon
at the bottom left- hand side of your computer screen. The Bluetooth
icon appears there. Right-click the icon and click Add Device.
2
Find your Bluetooth headphones on the list and double-click it. The
computer and Bluetooth headphones will now sync.
3
Open the Skype program. On the top menu bar, click the Tool s tab, then
click Options.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 10 Tuesday, July 8, 2014 10:25 AM
To Next Page
Loading...
