7MD-HPBT01
Pairing your stereo headphones with a Bluetooth device
Your stereo headphones can store pairing information for up to 8
Bluetooth devices, such as phones and tablets.
Notes: Your stereo headphones:
- Range is 33 feet (10 meters).
- Support easy pairing.
- Prompt you by saying “Connected,” when connected.
- Support a battery indicator icon on an iOS device.
1
Make sure that your Bluetooth device supports the Bluetooth V 3.0
protocol and is not paired with another device. To determine what
Bluetooth protocol your device supports, see the documentation that
came with your device.
2
With the headphones turned off, press and hold
(power/talk) for four
seconds. The LED blinks blue and red rapidly, then pairing mode is
activated
.
3
Make sure that your Bluetooth device is within 33 feet of your stereo
headphones.
4
Turn on your Bluetooth device, turn on Bluetooth, then set your device
to pairing mode. For more information, see the documentation that
came with your Bluetooth device.
5
On your Bluetooth device, select “MD-HPBT01”, then enter the password
0000 (four zeros), if required, to pair your headphones. Your stereo
headphones pair with the Bluetooth device and the LED on your stereo
headphones blinks blue every two seconds.
For more information on pairing Bluetooth devices to your cell phone or
MP3 player, see the device's documentation.
MD-HPBT01_14-0244_MAN_V1_ENG.fm Page 7 Tuesday, July 8, 2014 10:25 AM
To Next Page
Loading...
