EasyManua.ls Logo

Modbus Slave - Software Configuration and Operation; Compositor Software and Configuration

Modbus Slave
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual
Modbus Slave
/
Modbus
TCP
Master
-
Document code: MN674-A003_ENG Revision 1.000 Page 12 of 30
USE OF COMPOSITOR SW674-A003:
To configure the Converter, use the available software that runs with Windows called SW674-A003. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW674-A003, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for
SW674
-
A0
0
3