EasyManua.ls Logo

Modbus Slave - Page 16

Modbus Slave
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual
Modbus Slave
/
Modbus
TCP
Master
-
Document code: MN674-A003_ENG Revision 1.000 Page 16 of 30
The means of the fields for the “Modbus TCP Master” section are:
In the field “IP Address” the IP address of the converter is defined;
In the field “SubNet Mask” the Subnet Mask of the converter is defined;
In the field Gateway the default gateway of the net is defined. This feature can be enabled or disabled pressing the Check Box
field. This feature is used for going out of the net;
In the field “Port” the TCP port for Modbus TCP communication of the converter is defined;
In the field “TimeOut (ms)” the maximum time that the converter attends for the answer from the Slave interrogated is defined;
If the option Don’t disconnect the socketis checked, the converter will hold the TCP connection opened. Otherwise. It will close
it after every request/response.
In the field “Fix IP Address” the IP Address of the Modbus TCP slave is defined (only if “Work with Fix IP Address” mode is set).